美國AccuMAX SPECTROLINE XS-555/I可見光傳感器，白光照度檢測

美國AccuMAX SPECTROLINE XS-555/I可見光傳感器，白光照度檢測
傳感器型號XS-555/I，外形尺寸(長x寬x高)：7.6cmx5.1cmx2.2cm ；凈重：68克
檢測可見光照度（白光照度），中心峰值波長：555nm，測量量程：0-5300 lux(勒克斯) ；0-500 fc(英尺燭光)。
SPECTROLINE AccuMAX™ 系列數字式黑白兩用照度計

美國Spectronics公司生產的SPECTROLINE AccuMAX™ 系列數字式紫外線及白光強度計的主要特性：
? 微處理控制的主機XF-1000(適用于測量燈管式紫外光源)及XR-1000(適用于燈泡型高壓汞燈式紫外光源)，可通過可更換傳感器測量多種波長紫外線強度及藍光和白光強度。
? 根據測量結果，自動切換量程及顯示單位。
? 五個用戶可定義的設置及三個主菜單操作模式(數據/正常模式，自動清零及積分)，具有數據保持、峰值及返回功能。
? 紫外強度分辨率達1uw/cm2，全程精度優于+/-5%，可溯源到NIST(美國國家計量院)標準
? 可顯示紫外照射劑量及照射時間內的zui高強度及平均強度
? 的帶通干涉濾色片
? 可以將探測器直接連在主機上，或通過USB連線將探測器連到主機上
? 的余弦曲線反應
? 用戶可定義的省電模式及自動關機功能
? 兩節9V堿性電池工作(含)
? 大的，易于觀察的液晶顯示
? 密封傳感器外殼，及防水的USB連接器
? XF-1000主機外形尺寸(長x 寬x 高): 7.75x 4.25x1.25英寸(19.7x10.8x3.2cm)
? 主機重量1.1磅(499克)

AccuMAX 系列強度計為的紫外線強度、劑量測量及可見光照度應用而設計。通過選配可更換傳感器，可以測量紫外強度及紫外照射劑量(能量)。XR-1000及XF-1000主機為圓滑設計，外殼結實。根據不同的測量結果，自動選擇顯示單位，zui多顯示四位數值。顯示屏為3"液晶顯示，帶圖標及數字顯示。主機外套有可拆的橡膠保護套。同時可選配手提箱。

AccuMAX 傳感器滿足實驗室及生物應用要求。傳感器防水、具有密封外殼，高性能帶通濾色片及的余弦反應。單波長的傳感器可提供標準量程(XS系列)及特寬量程(XTS系列)。標準量程適傳感器適合于檢測管式及高壓汞燈泡式紫外光源，特寬量程適合于特高強度紫外光源如紫外固化及光催化應用。同時可提供單波長可見光傳感器(XS-555/I)及亮度傳感器(XS-555/L)。而且，還可提供雙波長傳感器探測器XDS-1000，可同時測量長波UVA紫外線強度及白光照度。所有傳感器可方便地直接和主機相連或通過USB連線和主機相連。如需要，可選配5英尺(1.5米)長帶防水適配器的的USB連線(件號XCB-100)。

? 四個按鈕便于輕松操作-直覺交互功能
? 菜單驅動，用戶可選設置：選擇測量顯示單位及背景顯示燈以適合運行環境。
? 屏幕顯示儀器狀態，電池電量水平，紫外線強度，波長及當前可提供的功能。
? 多功能控制主操作模式：數據/正常模式、自動清零模式及積分模式。
? 附加特性(峰值、保持及黑屏)嵌入在主操作模式中。
? 積分(INTG)模式對一段時間內照射到傳感器的紫外線強度進行累積--對于紫外劑量/能量應用特別有用。

美國AccuMAX SPECTROLINE XS-555/I可見光傳感器，白光照度檢測

AccuMAX 微處理器控制的軟件對用戶是關鍵-提供友好操作、*功能及的讀數。主機隔模面板上的四個壓敏按鈕提供多種*功能。軟件驅動功能菜單使操作人員可以進入三種主操作模式：數據/正常模式、自動清零模式及積分模式。為了省電，除了積分模式，在其他所有模式下10分鐘沒有操作則自動關機。而且， 軟件允許用戶定義紫外線強度顯示單位及液晶屏背景光設置。所有這些功能及其他可選功能通過軟件的主菜單及子菜單都可輕松進入。

用戶定義設置
AccuMAX 為用戶提供方便的自動紫外線強度顯示單位(uw/cm2,mw/cm2及w/cm2)。用戶也可以選擇及調整顯示對比度、背景光亮度及主動和被動運行的時間間隔(有助于省時的功能)。除非主機處于低電量狀態，否則所有的用戶可選參數將進行保存便于將來操作使用。 

操作模式
數據/正常模式
此模式將實時測量照射到傳感器上的全部紫外線強度。用戶可以?xún)鼋Y(jié)讀數及顯示數據。在正常模式下，PEAK功能將凍結并顯示記錄的zui高強度值。
自動清零
在此模式下，AccuMax強度計自動減去"不想要的"環境光，所有測量的讀數為相對于環境光的讀數。保護用戶數據-記錄也由此模式進入。.
積分(INTG)
在積分模式，儀器將照射到傳感器上的紫外線進行累計，之后顯示吸收的總紫外能量(單位為焦耳/cm2)。在此模式下，F(xiàn)reeze凍結功能將所顯示的過程保持在背景。為了方便操作，在積分模式，AccuMax將不自動關機，以便用戶可以連續長時間測量紫外線劑量。

的英文介紹：

AccuMAX™ Series for Laboratory
Digital Microprocessor-Controlled Meters
Features two advanced digital, microprocessor-controlled readout units (XF-1000 for fluorescent UV tubes; XR-1000 for HID UV bulbs) specially calibrated to complement a full line of interchangeable AccuMAX series sensor detectors
Software-driven functions provide multifaceted light level reading
User-selectable, multilingual display settings. Choose from English, French, German and Spanish.
Five user-customized settings and three main operation modes (absolute data/normal, autozeroing and integration) featuring hold, peak and back functions
Overall accuracy of better than ±5% with reference to NIST standards
Superior bandpass interference filter resists degradation and prevents undesirable radiation readings
Excellent linearity and cosine response
Choice of direct or USB cable connection between sensor detector and readout unit (XCB-50 USB cable included)
Large, easy-to-read monochrome LCD screen
Automatic shutoff and user-defined power save features
Powered by two 9-volt alkaline batteries (included)
Readout unit dimensions (W x L x H) : 4.25 in x 7.75 in x 1.25 in, 10.8 cm x 19.7 cm x 3.2 cm)
Readout unit weight: 1.1 lb (499 g)
 
The AccuMAX series is designed to provide accurate readouts for UV irradiance, visible illuminance or luminance light readings. When equipped with an interchangeable sensor detector, the AccuMAX readout unit can be used to perform fluorescent inspection (intensity check through normal operation) and UV dosing (energy check through integration operation). Both the XR-1000 and XF-1000 readout units feature a sleek design and rugged housing, maximum 4-digit autoranging and easy-to-read 3 inch monochrome LCD screen with icons and alphanumeric display. A removable, rubber protective boot for the meter is included. A padded carrying case is available as an accessory.

 
Four side-by-side buttons provide for easy operation of user-intuitive interactive functions
 
Menu-driven, user-selectable settings; customized visible units of measurement and backlight display to suit operating conditions
 
Screen displays meter status, battery power level, light intensity, wave type readings and user-available functions
 
Multiple-function control of main operational modes: absolute data/normal, autozeroing and integration
 
Multifaceted light level reading and access to additional features (peak, hold and back screen) embedded within main operational modes
 
Integration (INTG) mode sums up cumulative ultraviolet light exposed to sensor over an interval of time – useful for UV dosing applications
 
The AccuMAX meter’s microprocessor-controlled software is the key to its user-friendly operation, advanced functionality and accurate readouts. Four pressure-sensitive buttons on the readout unit’s membrane keypad offer an extensive array of advanced features. The software-driven function menu gives full access to the three main operating modes: absolute data/normal, automatic zero and integration. To save battery power, the meter automatically shuts off after 10 minutes of non-use in all modes, with the exception of integration. In addition, the software allows the user to customize units of measurement for visible light readouts, as well as LCD screen backlight settings. These functions and other user-selectable parameters are easily accessible though the software’s main and subordinate menus.
 
Customizing Settings
 
The AccuMAX provides users the capability of selecting the default visible unit of measurement in their choice of foot-candles (fc), lux, lm/ft2 or lm/m2. The user can also select and adjust the display contrast, backlight brightness and interval between active and passive operations, which also helps conserve battery power. Unless the meter is at low-battery status, all user-selectable parameters will be saved and used for future meter operations.
 
Operational Modes
 
Absolute Data/Normal
This mode will measure the real-time absolute total light to which the sensor is exposed. The HOLD function is accessible in this mode, giving the user the option to freeze the reading and display the data. The PEAK feature is also available in this mode, which will freeze and display the highest intensity reading recorded during normal operation.

Automatic Zero
In this mode, the AccuMAX automatically subtracts “unwanted" ambient light when measuring light output. All subsequent measurement readings will be relative to this zero light level, saving the user data-recording time. The HOLD and PEAK features are also accessible in this mode.

Integration (INTG)
In the integration mode, the meter sums up the cumulative ultraviolet light that the sensor is exposed to over an interval of time, then displays the resultant total energy absorbed in joules. This mode is useful for UV dosing applications when checking energy levels of the light source used. In this mode, the freeze feature will hold the displayed data static while continuing the integration process in the background. For convenience, the AccuMAX will not shut off automatically after 10 minutes (as it would in other functions), allowing the user to continue integrating for extended periods of time.

Sensor Detectors
AccuMAX sensor detectors are designed to meet virtually any laboratory or life science application. These detectors feature water-resistant, sealed sensor housings, superior bandpass interference filters and excellent cosine response. Single-wavelength detectors are available in both standard range (XS-series), ideal for checking the intensity of fluorescent UV tubes and HID UV bulbs, and extended range (XTS-series), useful for high-intensity light sources used in curing and photoactivation applications. Also available are a single-wavelength visible illuminance detector (XS-555/I) and a luminance detector (XS-555/L). All sensors can easily be connected to the readout unit either directly or with a standard USB cable. A special 5 foot USB cable with water-resistant adapter (XCB-100) is available as an accessory.

XRP-3000 AccuMAX™ for NDT
Advanced Digital Radiometer/Photometer Kit
Single detector with dual sensors measures both ultraviolet and visible light. Complies with ASTM specifications for MPI and FPI. Specially engineered for NDT applications.